Article -> Article Details

Description
Title	Stone cutting machine maintenance guide
Category	Web Directories --> Free
Meta Keywords	stone cutting machine
Owner	wanlongmachines
The stone processing industry has a long history. Since the beginning of human activities on the earth, there has been stone processing. Stone machinery is the machinery and tools needed in the process of stone mining, processing, decoration and other processes. Here we mainly briefly talk about the use of stone cutting machines. maintenance and maintenance. 1. Oil must be filled and changed in strict accordance with the lubrication requirements. 2. Regularly check whether the various fasteners are loose, and ensure that they are fastened. Any small negligence will lead to serious consequences; check the saw blade regularly: when it is found to be worn, replace it with a new saw blade in time 3. When replacing the diamond circular saw, the runout of the end face of the saw blade should be detected. The new saw blade should not exceed 0.8mm, and the rewelded saw blade should not exceed 1.5mm. 4. Regularly check whether the tension of the V-belt is moderate, whether there is slipping, and whether it is aging. If it is necessary, it should be adjusted or replaced. 5. Regularly check whether the centralized lubricating oil circuit is smooth. 6. Always check the electrical components in the control cabinet, whether the wiring screws are loose, and whether the action is sensitive. If any screw is loose, it should be tightened again immediately. Any small negligence will lead to serious consequences. 7. Whether the center of gravity is correct and stable when cutting the block, there must be 10~40mm left at the bottom of the block. 8. Regularly check whether there is water leakage in the spindle box. If found, the cause should be found out immediately, measures should be taken, and the oil should be changed again. 9. Regularly check whether all electrical appliances are safely grounded. 10. Regularly check whether the clearance of each motion guide rail is appropriate. 11. Maintenance of the motor: The coil of the motor of the stone cutting machine is the most important part of the motor. Check carefully whether the coil is damaged or not, and whether the cable is damaged. 12. Regularly clean up the sediment of the whole machine and sink. Today, the stone as a kind of building materials has been more widely applied to various areas of human life, which is an integral part of modern civilization. Wanlong has dedicated to stone cutting and stone application since 1993.Today, a daily average of 100,000 pieces of Wanlong diamond tools are exported around the world. Insisting on technological innovation, we continue to create more efficient and more cost-effective diamond tools. We have developed laminated stone panel. Our mission is bridging nature and human culture. Machinery: Wanlong Mechanical's mission is to provide customers with advanced technology solutions for efficient tools production. 30 years’ practical experience in stone machinery industry contributes to rich experience and Technological advantage of diamond tools. Wanlong machinery will fit the needs of customers with more sophisticated services to fulfill the mission. Diamond tools: Wanlong's mission is to make no stone hard to cut in the world, to help customer save production costs. More than 30 years in the line of diamond tools industry, Wanlong’s technological innovation improves the cutting efficiency, and save the cost for end-users. Stone Industry: Wanlong developed Aluminum Plastic Laminated Panel, Honeycomb Laminated Panel, Ceramic Thin Marble Panel, Fiberglass Thin Granite Panel, Fire Proof Thin Granite Panel and other new stone products. Not only save stone (3-5mm super thin stone, the original 1-3cm reduced to 3-5mm), but also let stone products have properties (impact resistance, high-temperature resistant, fire resistant, light weight, large single size 140x280cm ), expanding the application of the stone (high-rise building interior wall decoration, airplane and yacht interiors).